Maintenance tool
NEVER UNSCREW THE VALVE WHEN THE SUP IS INFLATED! RISK OF INJURY.
If the valve leaks, once the SUP is deflated, close it a quarter turn using the tool provided.
If necessary, it is possible to change the valve, please consult the workshop of your Decathlon store.
Recommendations for use
We recommend:
Always wear a buoyancy aid or a PFD belt.
Do not go beyond 300 metres from shelter.
Do not use the leash on rivers.
Notify someone of your trip and your whereabouts.
Research to find out if there are any local navigation rules that apply to the location of your trip.
Bag contents
Board
Fin
Light leash
Repair patch (without adhesive)
Valve tightening tool (use only with the SUP deflated)
Exposure and storage advice
Never leave your board out of the water in direct sunlight.
If you have to leave your board in the sun, we recommend keeping it away from any sources of heat (walls, floors, car roofs, etc.) and reducing the pressure to 10 psi in order to prevent overpressure and irreversible damage (explosion, delamination, leaks, etc.).
SUP with your pet
Find our advice guides on our ITIWIT website:
https://www.itiwit.fr/conseils/faire-du--stand-up-paddle-avec-son-chien-tp_1734
PLEASE NOTE:
It is best to protect your board with a towel.
Recommended user weight and maximum load
Recommended user weight:
Less than 60 kg: ultra-stable board.
60 to 80 kg : very stable board.
Over 80 kg: ideal board for easily starting out.
CAN BE USED BY MORE THAN ONE : 1 adult + 2 kids or 2 adults (seated/standing)
Maximum load to not fall in the water: 315 kg.
Construction
Single-layer 0.65 mm light knitted light dropstitch without a stringer for reduced weight and greater rigidity when paddling.
Repair
We have a stand up paddleboard repair kit, reference 8512384.
We recommend that you contact the workshop of your local store for all repairs.
Always dry
Its 6” thickness (height on water) keeps you dry when paddling on calm water.
Fin and fin base
Available through customer service and online in the event of breakage or loss.
SUP fin reference: 8403374
Remember to remove the fin once you get off the water.
If possible, rinse the fin base before and after use.
Start folding up from the fin base, following the dotted lines to avoid damaging the base.
Technical dimensions
Inflated board:
Length: 10’ (305 cm)
Width: 35" (90 cm)
Thickness: 6" (15 cm)
Volume: 325 litres
Weight: 9.5 kg (+/- 10%)
BAG CONTAINING SUP FOLDED:
Height: 103 cm
Width: 35 cm
Thickness: 22 cm
These dimensions leave space for a pump and paddle (not included)
Inflating & deflating the stand-up paddleboard
INFLATION:
Check the valve’s orange button is up (closed), by pressing on it.
Connect the pump.
Inflate to 15 psi.
The more inflated the SUP, the more stable it is and the better its movement.
Disconnect the pump and close the outer plug.
DEFLATION:
Firmly push the valve’s orange button to let the air out.
Do not put your face near and stay back.
Roll, starting from the opposite side to the valve to remove all the air.
Leash
NEW light LEASH for more comfort.
Always wear your leash to stay attached to your board if you fall. It is attached to the ankle and cannot be used in surf or on rivers.
Remove it and rinse after each use.
Store it in the pouch in the bag to protect your PAD when folding.
