How can i repair my stand up paddleboard?
We offer a stand-up paddleboard repair kit (ref. 8512384) for easily fixing small, visible leaks.
For all other repairs, we recommend contacting your Decathlon store’s workshop.
Our teams can work on fin bases, handles and valves, as well as larger leaks.
Versatility: a 2-in-1 product!
Kayak mode: install the seat and use the paddle in kayak configuration to discover this sport.
SUP mode: stand and paddle with the paddle in SUP configuration, stowing the spare section under the bungee cords.
Single-layer Dropstitch knit construction without stringer, with double-layer glued rails for added strength and durability.
Technical dimensions and weights
Inflated board:
- Length: 10'6 (320 cm)
- Width: 33" (84 cm)
- Thickness: 6" (15 cm)
- Volume: 290 litres
Weight board only: 8.4 kg (+/- 5%)
Weight board, leash, fin & backpack: 9.6 kg (+/- 5%)
Weight of the paddle included: 1.2kg (+/- 5%)
Weight of the pump included: 1200g (+/- 5%)
Bag containing the folded SUP:
- Height: 92 cm
- Width: 40 cm
- Thickness: 30 cm
These dimensions leave space for the pump and paddle.
How many people can the board hold and what is the maximum weight?
Designed for riders up to 130 kg without compromising paddling quality.
Recommended user weight:
Under 80 kg: very stable board
Over 80kg: the ideal board for getting started easily
The board can be used by more than one person:
- 1 standing adult + 1 or 2 kids (seated or kneeling)
- 1 standing adult + 1 adult (seated or kneeling)
Maximum buoyancy load to keep from sinking: < 290 kg
HOW TO ATTACH YOUR SEAT TO YOUR SUP
For reasons of grip and comfort, we advise against placing the seat on the board handle.
Position the seat slightly back from the handle, feed the straps through the loops on the board and tighten them using the buckles on the seat.
Finally, adjust the backrest angle to your liking by tightening or loosening the straps.
What’s in the pack?
A 10’6 SUP
A take-apart adjustable paddle
An easy manual pump
A standard fin
A seat
A backpack
A leash
An instruction manual
A repair cloth (glue not included)
A valve spanner (to be used when the SUP is deflated)
How to attach the seat to the board
The seat must be positioned upright to ensure good posture and prevent friction with the pad (as shown in the photo).
Position the seat slightly back from the handle, feed the straps through the loops on the board and tighten them using the buckles on the seat.
How to inflate and deflate your stand-up paddle board
Inflation:
- Check that the orange valve button is in the raised (closed) position by pressing it
- Connect the pump
- Inflate to 15 PSI (the higher the pressure, the more stable the SUP and the better it glides)
- Disconnect the pump and close the outer plug.
Deflation:
- Press the orange valve button down firmly to release the air
- Keep your face away and stand back
- To fold, start from the opposite end to the valve to expel all the air
Fin and fin base
Available through customer service and online in the event of breakage or loss.
SUP fin reference: 8363793.
Our maintenance tips:
- Remember to remove the fin once you get off the water.
- Rinse the fin box before and after each use to keep it working properly.
- Start folding up from the fin box, following the dotted lines to avoid any risk of damage.
